Tag

wireless speakers

Browsing

Do you own any outdated speakers? The good news is that you can make a wireless sound system out of your old speakers to give them new life. You can quickly turn a set of wired speakers into wireless ones with the use of a wireless speaker kit. Bluetooth or radio frequency waves are used to convey audio signals via wireless speaker kits.

To properly power your speakers, you might also need to include an amplifier in the arrangement. We’ll provide you with some advice on how to choose the best wireless speaker kit in this article. After that, we’ll walk you through the process of making wired speakers wireless. Let’s get going!

wired speakers to wireless

Wireless Speaker Kit

With the use of a transmitter and a receiver, wireless speaker kits are used to stream audio from wired speakers. Before you purchase a wireless speaker kit, you should be aware that there are various wireless speaker kits.

Variety of Wireless Kit

The variations of this product, include wireless speaker kits that broadcast Bluetooth signals, radio frequency signals, and signals without built-in amplifiers.

Speakers without built-in amplifiers are typically less expensive and need lower power outputs. However, you’ll need a wireless conversion kit with built-in amplifiers if your speakers require higher output.

Transmission Range

You should also take the transmission range into account when selecting a wireless speaker kit. A typical wireless kit’s broadcast range is between 100 and 300 feet. We suggest a wireless speaker kit with a 300-foot direct range and a 100-foot range when obstructions like walls and ceilings are present.

Steps How To Convert Wired Speakers To Wireless

wireless speaker

Follow the instructions below to transform your old speakers into modern speakers.

1) Selecting Wireless Speaker Kit

Two receivers and a transmitter make up the majority of wireless speaker kits. In addition, cables and AC adapters are provided for the power output. The fact that there are three primary categories of wireless speaker kits was also discussed.

To start narrowing down your options, consider whether you require a kit with an integrated amplifier. If your receiver only produces a little amount of power, kits with built-in amplifiers are a suitable option. You don’t need to purchase a speaker kit with an amp if your speaker is active.

You should also check the transmitter’s and receiver’s inputs. You can connect RCAs directly from the receiver to the transmitter if your receiver has pre-outs.

If not, you must use standard speaker wires for the input. Speaker-level input can easily be changed to RCA-level input using a line-level converter.

2) Connect The Transmitter

The transmitter must now be connected to the built-in amplifier or stereo out. The audio signals will be wirelessly sent by transmitters using Bluetooth or radio frequency.

Depending on the kit you select, there will be several audio signal input choices. Typically, you’ll find out this selection like RCA, speaker wires, and AUX 3.5mm.

3) Connect The Receiver

The configuration for receivers varies depending on the wireless kit you purchased.

  • Speakers with an internal amplifier – Active speakers are ones that have an internal amplifier. They can be connected straight to an electrical outlet. To wirelessly stream audio, just connect the RCAs on the speaker to the receiver.
  • Receiving units with an amplifier inside – Although it is uncommon, some receiving units already come with an app. From the receiver, connect your speakers straight to the speaker wires. After that, plug it into a power outlet.

4) Try Out Your Set-up

Your new wireless speaker should function if steps one through three were done successfully.

Here are some tips that will help you test your sound system:

  • Look at the connection between the transmitter and receiver if there is static noise or if the audio is sluggish or muted.

Another Option

You might not be aware of this, but certain smart gadgets can be connected to your wired speakers to give you the same wireless capabilities as a wireless speaker kit.

If you have a Google Home or Echo device, you may connect the smart speaker to your wired speakers by buying a stereo small male to dual RCA male adaptor cord.

After that, you can request that your smart speaker play a certain song or a playlist. Even better, you can use the smart speaker to stream music from your phone, which the speakers it is connected to will then playback.

Like the wireless speaker kit, the smart speaker transforms your wired system into a wireless receiver by acting as a link to deliver wireless audio.

Moreover, you can acquire particular wireless conversion kits that contain an input for your subwoofer on the transmitter if you already own a subwoofer and want to include it in your wireless system.

Make sure to carefully review the product specifications to determine whether this functionality is offered.

Don’t Discard Your Wired Speakers

how to convert wired speakers to wireless

It’s not always preferable to get rid of your old wired speakers and get a new wireless system. With the correct tools, you may convert your current wired setup to a wireless one and take advantage of a listening experience that is comparable to that of users of contemporary units.

The unit’s mobility is increased by switching to wireless connectivity, which enables you to roam around while your speakers continue to work anyplace that is within the signal range. Audiophiles may now listen to speakers through their own devices thanks to the groundbreaking technology known as Bluetooth. Bluetooth has given life to the world of communication.

However, not all wired speakers can transform the wireless signals the device transmits into a format that is suitable for them. In these situations, using RCA connections, an amplifier will serve as a middleman between the two parts and convert the received signals into a format compatible with the setup’s speakers. By doing this, you can continue to utilize your outdated wired speakers without having to buy a brand-new system.

The Dissimilarity Between Wired and Wireless Speakers

All speakers, whether wired or wireless, require an audio signal, power, and amplification in order to function. For conventionally wired speakers, these necessities are provided by amplifiers, wires, and cables.

Instead of using copper wire or cable to transfer audio signals to them, wireless speakers plug into a power source, have built-in amplifiers, and receive audio signals wirelessly through infrared light, radio frequency, Wi-Fi, or Bluetooth.

Traditional wired speakers lack an internal amplifier and are unable to receive wireless audio signals. However, you can utilize add-on gadgets to make them wireless.

Advantages of Making Wired Speakers to Wireless

Wireless speakers offer a variety of benefits that wired speakers simply cannot provide. For starters, they are incredibly convenient and easy to use. With wireless speakers, you don’t have to worry about dealing with tangled cords or having to move your furniture around in order to access the back of your stereo system. You can easily connect your wireless speakers to any device with Bluetooth capabilities, allowing you to stream music from anywhere in the house without having to worry about wires getting in the way.

Another great benefit of converting your wired speakers into wireless ones is that it eliminates the need for an amplifier or receiver. This means that you can save money on purchasing additional equipment and instead invest in a quality set of wireless speakers that will last for years.

Additionally, since there are no wires involved, you won’t have to worry about signal interference or static noise when listening to music through your wireless speaker system. Finally, many modern wireless speaker systems come with voice control capabilities, allowing you to control them using simple voice commands. This makes it even easier and more convenient than ever before to enjoy your favorite tunes without having to get up from the couch.

Conclusion

Setting up a wireless audio system doesn’t have to be a daunting task. With the right equipment and some basic instructions, you can easily transform your old wired setup into a modern wireless one. Whether you’re an audio enthusiast or just looking for an upgrade, there’s something out there that will suit your needs.

The key is to find the right kit for you and follow the instructions carefully. With today’s technology, it’s easy to make the switch from wired to wireless without sacrificing sound quality or convenience. So don’t be intimidated by the process – with a little bit of research and effort, you’ll soon be enjoying your new wireless audio system.