Tag

steps to clean your iPhone speakers

Browsing

Your iPhone speaker will slowly get filled up with dust, dirt, etc., which can result in calls being harder to hear and decrease the quality of playback. You need to learn how to clean your iPhone’s speakers if you want them to sound good.

The good thing is, you can clean your iPhone speakers with various different household items. But, you have to be gentle when cleaning it, as it’s one of the most fragile parts of overall rugged technology.

Here’s How To Clean iPhone Speakers With 4 Simple Steps

iPhone speaker

There are four basic ways to clean your iPhone speakers. You could clean your iPhone speakers with a soft brush, use an air blower, you could use painter’s tape, or clean your iPhone speakers by using a toothpick.

Most importantly, do not use liquids when cleaning your phone speakers, even with rubbing alcohol. Liquids can easily damage the interior of your iPhone. Here are the steps:

Step 1: Cleaning iPhone Speaker With Soft Brush

The perfect way to remove dust and dirt from your iPhone’s speaker is to use a soft brush, preferably a small one. Consider trimming the bristles to half an inch in length for better control.

You can also utilize a soft-bristled brush to remove get rid of dust from the lower speaker holes close to the charging port.

Gently insert the bristles into the holes, rotate lightly, and remove them to pull out dust and dirt.

Do not use rubbing alcohol or other liquids. Rubbing alcohol evaporates faster than water, but all kinds of liquids and the inside of iPhones are not good mixes.

Apple itself recommends a soft bristle brush for cleaning the speaker.

Step 2: Cleaning iPhone Speaker With Painter’s Tape

Good painter’s tape will leave no residue on your iPhone speaker. Use little bits of painter’s tape or masking tape, sticky side down, to lift debris off the speaker on the front of the phone.

Turned to form a point and you can use painter’s tape to lift dirt from the speaker holes on the bottom also.

The tape should pick up dirt and debris that builds up on the speaker.

See the surface of the masking tape after every use. If it has dust or dirt on it, remove and throw away the used tape, roll up another painter’s tape, and repeat the procedure.

Step 3: Cleaning iPhone Speaker By Using A Toothpick

steps to clean iPhone speakers

Finally, you have this household item to clean your iPhone speakers. But since it is pointed stuff, you have to be very cautious when using them because it can damage the internals if used mistakenly.

If necessary, remove your iPhone case and have a flashlight on so you can see what you’re doing.

By utilizing the tip of a plastic or wooden toothpick, softly insert the toothpick into the speaker hole. Do not apply pressure or push any further if you feel resistance.

Step 4: Clean Your iPhone Speaker With An Air Blower

Others recommend using compressed air to clean iPhone speakers, which can easily cause damage. A safer way is to utilize an air blower. This can be used to blow off excess dirt after using any of the procedures mentioned above.

Move the air blower slightly away from the speaker and use a few short bursts to blow away any dirt or dust. Not as powerful as compressed air, but that’s the right thing.

If needed, move the blower closer for better effect. Check on the improvement and repeat the process if essential.

Do not try to utilize compressed air. These products are useful for cleaning tough electronic devices such as laptop keyboards, but the forces they generate are too strong to apply to more delicate electronic devices. It can push dirt further into the device.

You May Try To Use Cleaning Gel

cleaning iPhone speaker

Available in slime, a cleaning gel will also help you clean your speaker quickly. It’s quite expensive for cleaning but works better than cello tape because it gets to the inside of the speaker grill promptly. Just roll the cleaning slime over the speaker. It cleans the speaker by collecting dust and debris.

Check Your iPhone Speakers To Make Sure It’s Working

If you’re unsure if the speakers of your iPhone are working properly, there’s a very easy way to check.

Go to your iPhone’s Settings app and click Sounds or Sounds & Haptics, depending on which iOS you’re using. Find the Ringer and Alerts slider and drag it back and forth a few times.

This will generate ringtones with different volumes. If you can’t hear any sound or if the speaker button in the Ringer and Alerts slider is grayed out, your device may need a check-up.

Also, if the sound quality on your iPhone still seems distorted, it may be a software issue rather than a speaker block issue. Try to do this, by turning it off and then on again. Unluckily, if the problem persists, you will have to bring it in for repair.

Conclusion

A dirty iPhone speaker may affect the sound quality of your phone. We hope you are able to get rid of all the dirt and dust in your iPhone speakers by following the steps mentioned above without affecting the hardware of your phone. For more tips and guides, follow us!