Speakers Daily
Tag

speaker reviews

Browsing
How to Clean iPhone Speakers
Guides & Reviews

How to Clean iPhone Speakers: 5 Easy Steps

You might need to learn how to clean iPhone speakers if the audio quality on your phone isn’t what it once was. When was the last time you checked the speakers on your iPhone? We frequently take the time to clean the displays of our iPhones or even give the clear phone cover a once-over.

Due to regular use, dust, dirt, and debris can accumulate in these tiny ports, causing phone conversations to be muted and audio output to be lowered.

The good news is that you can restore your iPhone to sound like new. You might simply believe that it is aging. Like learning how to clean an iPhone’s charging port, cleaning the speakers is a delicate process, but it can be accomplished with the proper approach and care.

Here, we’ll walk you through everything you need to accomplish step-by-step and address any queries you may have. How to clean iPhone speakers is shown below.

Ensure Your iPhone Speakers Are Working

There is a super-fast technique to check if your iPhone speakers are functioning properly if you’re unsure.

Choose “Sounds” or “Sounds & Haptics” from the Settings app on your iPhone, depending on the version of iOS you’re using, then look for the “Ringer and Alerts” slider and move it around a bit.

This ought should generate a ringtone sound with different loudness levels. You should contact Apple if you don’t hear any sound coming from your speaker or if the speaker button on the “Ringer and Alerts” slider is dull.

5 Easy Steps How To Clean iPhone Speakers

Depending on what you have at home, you can use one of a few techniques to clean the speakers on your iPhone. We’ll walk you through each of them in this section. The most crucial thing to remember is not to clean these components with any liquids.

Step 1 — Using Painter’s Tape

Clean iPhone Speakers Using Painter's Tape

Your iPhone speaker won’t pick up any adhesive from a quality painter’s tape. To remove debris from the speaker on the front of the phone, use tiny pieces of painter’s tape or masking tape with the sticky side down.

Painter’s tape can be used to remove dirt from the speaker holes on the bottom and turned to make a point.

Any dirt and debris that accumulates on the speaker should be captured on the tape.

Examine the masking tape’s surface after each use. Remove and discard the used painter’s tape if it has dust or dirt on it, then roll up a new tape and repeat the process.

Step 2 — Using Soft Brush

Cleaning iPhone Speakers using soft brush

Use a soft brush, ideally a small one, to clean dirt and debris from the speaker on your iPhone. For improved control, think about shaving the bristles to a length of half an inch.

A soft-bristled brush can be used to clear dust from the lower speaker holes near the charging port.

To remove dust and filth, gently put the bristles into the holes, rotate them, and then take them out.

Never use liquids such as rubbing alcohol. Even though rubbing alcohol evaporates more quickly than water, liquids shouldn’t be mixed with the interior of iPhones.

The speaker should be cleaned using a soft bristle brush, according to Apple.

Step 3 — Using A Toothpick

Cleaning iPhone Speakers using toothpick

Additionally, you have this common object to clean the speakers on your iPhone. However, because they are pointed, you must use them with extreme caution as a mistake could inflict inside damage.

Remove your iPhone case if required, then turn on a flashlight so you can see what you’re doing.

Softly insert the toothpick into the speaker hole using the tip of a wooden or plastic toothpick. If you encounter resistance, stop pushing and stop applying pressure.

Step 4 — Using Air Blower

Cleaning iPhone Speakers using air blower

Others advise cleaning iPhone speakers with compressed air, however, this can easily result in damage. Using an air blower is a safer option. After utilizing any of the aforementioned techniques, use this to blow off extra dirt.

To remove any debris or dust, move the air blower a little bit away from the speaker and blow it briefly many times. Although less potent than compressed air, doing so is the proper thing.

If necessary, bring the blower closer for improved impact. Verify the progress and repeat the procedure if necessary.

Never attempt to use compressed air. The forces that these items produce are too intense to use on more sensitive electronic equipment, yet they are useful for cleaning sturdy electronic gadgets like laptop keyboards. It can force dirt deeper into the device.

Step 5 — Using A Cleaning Gel

You can also quickly clean your speaker with a cleaning gel, which is also available in slime. Although it costs a lot to clean, it is superior to cello tape since it quickly reaches the speaker grill’s interior. Simply cover the speaker with the cleaning slime. Dust and debris are gathered, cleaning the speaker.

Bring your iPhone into Apple Service

Let the experts handle the situation when all other options have failed. Visit the nearest Apple service location with your iPhone. To clean the iPhone speakers, they will use the right equipment. Although it might be a little expensive, using Apple’s qualified specialists to service the iPhone speaker is the safest course of action.

Avoid These Things When Cleaning iPhone Speakers

The speakers or their internal peripherals may be harmed if the iPhone speakers are cleaned improperly. What not to do when attempting to clean the iPhone speakers is listed below.

  • Avoid using any sharp objects when attempting to gouge away any dirt. You can scrape your speaker grilles by using the pointed end of toothpicks, tweezers, or even paperclips, according to some advice.
  • Don’t use compressed air. These tools are helpful for cleaning durable electronics, such as laptop keyboards, but the force they exert is too great to use on more delicate gadgets. It’s possible that you’ll wind up pushing dirt deeper into the appliance.
  • Do not use any liquid, not even rubbing alcohol. While rubbing alcohol does evaporate more quickly than water, any liquid and the internal components of iPhones should not be combined.
  • Avoid pressing the cleaning putty too firmly into the speaker grilles while using it on the iPhone speakers. This can force the dirt or debris closer to the speakers.
  • While the iPhone is being charged, never clean the speaker. That can endanger both you and the gadget. First, always turn off your iPhone.

How To Remove Water From iPhone Speakers

Has dropping your iPhone into water caused the speaker to sound muffled? Be at ease. The volume and speaker quality of the most recent iPhones could be impacted by fluids and dirt even though they are water-resistant.

Things to remember before you begin:

  • Be sure to use a soft, dry cloth to wipe the iPhone.
  • Clean the affected area with fresh water if you spilled something other than water.
  • Make sure no accessories, including earbuds or the Lightning cable, are plugged in.
  • Don’t use your damp iPhone’s charging port. Over the next five hours, don’t charge.
  • A damp iPhone’s SIM tray should not be opened.

Using Water Eject Shortcut

To remove water from iPhone speakers quickly and easily, use the Water Eject shortcut. You don’t need to download any third-party applications.

  • Launch your browser and click the Water Eject Shortcut link.
  • Click Obtain Shortcut.
  • The Shortcuts application will launch automatically. Click Add Shortcut.
  • To execute the shortcut, press it now. Choose Start Water Ejection.

If your iPhone speakers are facing downwards, the shortcut will immediately turn your iPhone volume to maximum and begin playing music to help you throw liquids away. Gravity makes this process much simpler. To make sure there is no water left inside, you can play it several times.

Using Sonic App

  • Open the Sonic application after downloading it for free from the App Store.
  • Put the iPhone on a surface that is flat or slightly slanted downward. To raise the volume, use the volume up button.
  • The water drop symbol should be tapped and held down.
  • Swipe anywhere on the screen to adjust the frequency to a number between 160 and 200.

Use The Online Tone Generator

  • On your iPhone, launch Safari or another browser.
  • Visit a website like FixMySpeakers or OnlineToneGenerator
  • Pressing the water blower button will start the sound.

FAQ

How can I clean an iPhone speaker that is muffled?

Take off any cases, films, or screen guards that are affixed to your phone. Check the speaker aperture to see whether it is blocked or dirty. Verify that the iPhone’s receiver is not dirty or obstructed. If necessary, clean the speaker or receiver aperture with a tiny, soft-bristled brush.

Why does the speaker on my iPhone sound scratchy?

If the sound from your iPhone speaker is distorted, check your sound settings and install the most recent iOS updates. Use a delicate cloth, painter’s tape, or a brush with soft bristles to clean the speaker after that. 

Could dust harm speakers?

The biggest threat to speaker performance is dust, which is more than just a visual problem. In severe cases, too much dust could harm the speakers themselves. Put speakers in a case while not in use to prevent dust gathering, and clean them as necessary.

Wrapping Up

These were some practical methods for cleaning the speakers of dust and grime. We also covered the proper ways to clean water from your iPhone speakers so they can once again provide loud, clear sound. You should be able to clean your device’s speaker and earpiece using the aforementioned instructions. Please get in touch if you have any other questions or concerns.

by
Keep Reading
How Do Speakers Work
Guidelines

How Do Speakers Work?

Speakers are fantastic technological innovations that have had a significant influence on our culture. Nonetheless, they are incredibly straightforward machines at their core.

It’s simple to feel like you’re staring at a black box when you examine a piece of technology like a speaker and wonder how speakers work.

What is concealed within them? It is somewhat true a lot of the time. Yet if you can master just one or two fundamental ideas, you’d be shocked at how far you can go.

The fundamental relationship between electricity and magnetism is one of the ideas that must be grasped to comprehend how something like a speaker functions. I’ll describe how they work in this in-depth article using precise explanations.

The History of Speaker

how speaker work

In fact, early telephone designs by Johan Philipp Reis from 1861 contain the first speakers. These were improved upon in later decades by people like Thomas Edison, Ernst Siemens, and Alexander Graham Bell.

But, the now-ubiquitous moving coil technology didn’t fully take off until the early 20th century. Oliver Lodge first created the concept in 1898, and Edward W. Kellogg and Chester W. Rice successfully patented it in 1925, establishing the fundamental design for practically all speakers in use today.

When producers worked to enhance features like overall power and frequency response in the setting of theaters and huge PA systems, things started to really take off in the 1930s.

Systems with several drivers for various frequency ranges, design uniformity, and better materials for components like the driver cone, magnet, and enclosure were all developments in the 20th century.

How Do Speakers Work?

Here is a detailed explanation of how speakers work:

1) The musical waveform’s representational output voltage starts to rise. From the positive side to the negative side of the speaker’s voice coil, an electrical current begins to flow.

2) The voice coil is surrounded by a magnetic field that has the same polarity as the permanent magnet fastened to the speaker frame. Keep in mind that magnetic fields that are opposite each other repel one another.

3) As the cone/diaphragm moves forward, air pressure is generated, which produces sound.

4) The current increases, the magnetic field strength of the voice coil grows, and the electrical signal voltage increase toward the peak of the sine wave in the musical signal.

5) The cone is further pushed out as a result.

6) After reaching its peak output point, the signal starts to decline. The cone starts to move toward its off (zero voltage) point as the current starts to decrease as well.

7) The cone returns to its initial position when the signal approaches zero (also known as the “zero voltage crossover threshold”).

8) Once the voltage shifts to the negative side, the electrical signal starts to reverse. A magnetic field with a reversed polarity is produced when current travels from the negative voice coil side to the positive.

9) The magnetic field of the voice coil now opposes the permanent magnet attracting it, and the cone starts to move from front to back (instead of the original rear to front).

10) The cone rotates backward as the signal continues, producing the opposite of the sound waves produced by air movement.

11) As soon as the stereo or amplifier output voltage reaches zero, the next audio signal starts playing and the cycle repeats itself.

In a sense, speakers are merely a form of electric motor that converts an electrical signal into a mechanical output—moving air to produce sound—by using it as power.

What’s Within A Speaker?

how do speaker work

The following components, which are found in most speakers, work together to produce sound:

Permanent Magnet – To enable movement, a magnet is employed to provide a constant magnetic field around the voice coil.

Voice Coil and Bobbin – A cylindrical tube is known as the bobbin is fastened to the cone’s base. The voice coil is an extremely long and tightly wrapped wire coil that receives electricity from an amplifier’s musical output, which travels through it to produce a magnetic field.

Spider or Suspension – The voice coil bobbin assembly is supported by the thin, wavy-shaped woven material known as the spider, which also aids in pushing the cone back into position when it shifts.

Cone & Dust Cap – This rigid cone-shaped material is moved by the voice coil and magnet working together to move air and produce sound. To keep dirt and dust out of the opening in the center, a thin piece of material called the dust cap is placed over it.

Speaker Basket – The basket, which the speaker pieces attach to and which maintains alignment, is a cast metal or stamped metal frame. Moreover, it offers a method of mounting the speaker assembly to a box.

Speaker Terminals & Braided Wire – The speaker wire is connected to the speaker by speaker terminals, which are metal tabs or connectors. They use a flexible braided wire that moves with the cone to connect to the voice coil.

Surround – The material holding the top edge of the cone to the basket is flexible and strong, typically rubber or a sort of foam.

Why are Speakers Fitted in Boxes?

Speakers are fitted in boxes for a variety of reasons. Firstly, the box helps to reduce any sound waves emitted from the back of the driver, which could interfere with the sound being produced from the front. This is known as ‘acoustic loading’ and it helps to make sure that all of the sounds are coming from one direction.

Secondly, boxes help to increase the bass response by trapping low frequencies inside them, so they can be heard more clearly. Finally, boxes also act as an amplifier for low frequencies by creating an internal resonance cavity that amplifies these sounds. This helps to create a fuller, richer sound overall.

Why are there Holes in Some Speakers?

how does speaker work

Many speaker boxes include circular holes or slots, usually on the front or back, as you may have seen. You may recognize a bass reflex enclosure by the ports or vents you can see in it.

Similar to how a note is produced when air is blown over an open bottle of beer, a bass reflex enclosure operates similarly. Because the volume of air inside the bottle changes as the number of liquids changes, the note also changes.

The note would also change if you were able to expand the bottle’s glass neck. It is a resonant system that can be tuned by changing the enclosure volume or the port dimensions.

If adjusted properly, this extends the system’s bass performance by producing a resonance just below the point at which the loudspeaker response would typically roll off. The port tuning must be calculated for the exact driver in the specific enclosure in order for this to function properly.

Even though the cone diameter of the new driver is the same, the box and port tuning will no longer be suitable, and the sound quality will suffer.

The basic operation of passive radiator loudspeakers is the same, but the bass resonance is produced by the enclosed air volume and a mass-loaded, unpowered speaker cone.

Why are Magnets Found in Speakers?

Electrical current is used by all speakers and amplifiers to produce sound. Magnetic fields are created when electrical current undergoes a transformation. Built-in magnets are used to create a magnetic field that opposes the magnetic field of the electrical current, causing the speaker’s cone to shake. We perceive sound because vibrations are produced when two magnetic fields that are opposed to one another repel one another.

What Increases a Speaker’s Volume?

The volume of a speaker depends on how much power is passed through it when it is in use. The power going through any amplifiers you have will also increase the volume. Its loudness is further affected by additional elements like speaker size, insulation, and speaker cone reflex.

Hence, if you want to increase the volume of your speaker, make sure it is big, has a compact, tight cone, and has sufficient insulation. It should also have the appropriate wattage.

How Often Do Speakers Vibrate?

The design of the audio system, specifically the audio signal frequencies present in the audio drivers, affects the frequency or rate of a speaker’s vibration. Most speakers can vibrate within an audible range with reduced bandwidth, and the sound range typically ranges from 20Hz to 20 kHz.

Final Thought

Speakers are a vital part of any audio system and understanding how do speakers work is key to getting the most out of them. From the basics of how speakers take an electrical signal and transform it into sound waves, to the importance of power, quality materials, and tuning, knowing these components can help you make the best choice when buying speakers. With this knowledge in hand, you’ll be able to find the perfect speaker system for your needs and get great sound from your audio setup. Whether you’re upgrading your car’s audio or want to fill your home with sound, understanding how speakers work is essential for enjoying great audio quality.

by
Keep Reading
Best Bose Speakers
Sound Picks

Bose Speakers: A Brand That Is Worth To Invest

Are you planning to buy speakers? But still undecided which brands of speakers to purchase or what speakers fit your needs and budget?

We at Speakers Daily are here to help to guide you in selecting speakers that are best for you and for your home. This speaker is one of the most famous brands worldwide. In this blog, we’ll give you knowledge and ideas about its features and why this brand is worth to invest.

Bose Speakers

Bose Speakers

This well-known brand offers a broad selection of other audio devices, meaning Bose offers more than a Bluetooth speaker. Bose products sound astonishing because of the quantity of bass produced by the product and the volume capacity.

Since 1964 the Bose company has been in the business, and it continues to provide more top-quality audio devices, along with Bluetooth speakers. From headphones, earbuds, accessories, and audio sunglasses, to speakers, Bose has got you covered!

Here Are Some Of The Best Bose Speakers You Can Choose

Bose Smart Home Speakers & Soundbars

For a cinematic sound and stunning appearance that completes your space, choose the Bose soundbars or TV speakers. As we have viewed, the Bose smart soundbar is a brilliant speaker that keeps you informed. It is also an impressive home music system that stays you entertained.

Many Bose home theater systems and soundbars have voice control capability, so you can relish hands-free access to your music always, all you have to do is ask. But music is just the start. You have access to other features such as timers, weather reports, and many more.

Home Speakers & Soundbars Products:

  • Bose Smart Soundbar 900
  • Bose TV Speaker
  • Bose Solo 5 TV Sound System
  • Bose Premium Home Theater System
  • Bose Smart Soundbar 300
  • Bose Smart Soundbar 300 Bundle
  • Bose Smart Soundbar 700

Bose Portable Bluetooth Speakers

Is an all-in-one speaker, it is a voice-controlled speaker, a wireless home speaker, and a portable Bluetooth speaker. You can take this speaker from room to room around your house. Or you can also take it with you if you move away from home. You can control it with your voice and stream music anywhere with WiFi.

One Of The Know Bose Portable Speaker Is: Bose Portable Smart Speaker

Features & Specs:

  • Spacious 360° Sound, Powerful Bass
  • Luxe Silver & Triple Black Color
  • Durable, Water-Resistant Design
  • Up To Twelve-Hours Battery Life Per Charge
  • Apple Airplay 2
  • Built-In Voice Control
  • Control With Voice, Touch, Or Tap
  • WiFi & Bluetooth Connectivity
  • Multi-Room Functionality
  • Power Cord
  • AC Power Adapter
  • Weight & Dimensions: 7.54″ H x 4.69″ W x 4.09″ D (2.34 lb)

Other Bose Portable Bluetooth Speakers Products:

Computer Speakers

Bose Computer Speaker

This Companion 2 Series III Multimedia Speaker System has clear sound at any volume with high-quality audio performance. If you enjoy playing games or love playing music and videos on your computer, this inexpensive yet elegant speaker is best for you. It comes with an accessory speaker, audio input cable with mini-plug, speaker cable, and AC power pack.

Specs:

  • Weight & Dimensions
    Right Speakers: 7.5″ H x 3.1″ W x 5.9″ D (2.3 lbs)
    Left Speakers: 7.5″ H x 3.1″ W 5.9″ D (1.8 lbs)
  • Inputs/Outputs: AUX Input, Headphone Jack

Every speaker has its special features and the Bose Speakers are carefully designed and provide durability, top-quality materials, and superb sound quality.

Watching movies or listening to music becomes more pleasurable when the audio quality is excellent. There are factors that you have to consider before purchasing a speaker. The price of the speaker is also a significant factor when selecting the best one for us. A device when loaded with superior features will give an outstanding quality sound without fail.

But generally, a speaker from a branded company is a good choice at all times regardless of the amount as they last longer than the cheap one. Considering each user has their own price range and choices, it becomes an unmanageable process at times. But with the support of the details given about different features and specs, the process becomes user-friendly and easier.

by
Keep Reading
Sonos Speakers
Speakers

Sonos Speakers: A Speaker That Will Take You To The Next Level

Speakers will add more entertainment to our home audio, and we have to admit that there is numerous speakers brand out in the market, but this speaker is one of the best-known brands in the market today. Read on to know more about this product.

Why Does Sonos Speaker Stand Out From Other Brands?

Best Sonos Speaker

Aside from its amazing features, this wireless speaker system is the easiest to listen to music and other audio entertainment in more than one room at a time, which is why Sonos is the most popular speaker brand we could choose from. Sonos is a leading brand speaker in home audio that offers high-quality sound around your home.

It is thoughtfully designed from the inside with best-in-class acoustics and advanced software, this wireless speaker offers various styles such as portable speakers, sets, speakers, home cinema, and more.

Invest In A Speaker That Will Take You To The Next Level

This smart home sound system brings every room and everyone together with amazing sound for TV, music, and more. Aside from the fact that this speaker is portable, you can easily bring it around to your home and beyond. The Sonos application combines all your settings and content into one effortless experience.

What Is The Newest Sonos Speaker?

Sonos Roam, this newest speaker offers incredible features, aside from its exclusive colors, it is also waterproof, drop resistant, Bluetooth and wi-fi ready, and Automatic Trueplay, we ensure that you will enjoy listening to music because of its long battery life of 10 hours. Experience seamless listening everywhere.

You will enjoy the Sonos experience on WiFi and stream audio directly from your tablet, smartphone, or even to your computer through Bluetooth. Experience this portable speaker at home and for all your listening adventures with this outdoor-ready, lightweight, smart speaker.

Aside from Roam speakers, Sonos also offers popular speakers including Move, One, Ray, Beam (Gen2), and Arc. Like Roam, these speakers also have outstanding features.

How Many Sonos Speakers Do You Need For Every Room And Which Speakers Are Right For You?

Top Sonos Speaker

Sonos has speakers that are suitable for various living spaces. The Sonos line of products is flexible and diverse, and just about anybody can find an answer to their needs. But with a wealth of options also comes the puzzle of choice, what Sonos speakers are best for you? Where do you begin? Here are some Sonos speakers that help you choose and guide you on which speakers fit your needs and requirements:

For a small or medium-sized area, the Sonos One speaker is appropriate for medium and small-sized rooms. You can control the music without utilizing your smartphone since it has touch controls. This speaker is voice-enabled, humidity resistant, and can use with WiFi.

The Sonos Move speaker is a durable and powerful smart speaker. You can enjoy your music outdoors because of its Bluetooth, WiFi, and internal battery, and it is easy to handle.

For your TV, gaming, and music experiences Sonos Ray‘s easy-to-use soundbar is the best choice for you. The color option is white and black. It also has touch controls, WiFi, and more amazing features.

The Sonos Five, this powerful speaker has six built-in speakers so it is suitable for a larger room. You can effortlessly set up a wireless connection with your smartphone using this speaker as Sonos Five has NFC.

If you are on a tight budget, you can start small and purchase any Sonos piece separately over time, mixing and matching your way to fit your audio needs. All Sonos product works great on their own, but the true magic of Sonos speakers happens when you widen your system.

For high-quality home audio and wireless speakers, Sonos systems are the best and worth every single penny. It is easy to use, has the go speakers, is easy to handle, and long battery life of 10 hours. Every speaker is carefully designed from inside and out, with many sizes which you can choose from, you can customize your sound systems with Sonos speakers.

The Sonos company offers free expedited shipping, and if ever the speaker you purchased does not work well, the returns are hassle-free.

Why High-End Speakers Are Expensive?

More high-priced audio products are probably to be better built and more structurally sound than inexpensive ones. This is not 100% the case, but budget manufacturing commonly leads to lower build quality. If you are planning to buy a new speaker for your home or for outdoor use, invest in a product that you can trust will last longer than the low-quality one. Generally, most high-end products are expensive probably due to their innovative design, durability, and premium materials.

by
Keep Reading
2 Speakers to Level-Up Your Gaming Experience
Speakers

2 Speakers to Level-Up Your Gaming Experience

Do you love playing video games but aren’t getting the feel of the game due to bad sound quality? Maybe it gets too loud and too low, making the whole experience just painful.

Before you hit the mute button and switch to a life of miserable gaming, our speaker experts at Speakers Daily have some amazing recommendations for you.

The Need For Great Audio in Gaming: 

Part of the gaming experience is being able to listen to the slicing swoosh of the sword or the shuffle of the feet as you sneak up on an opponent.

It is what makes the game interesting and interactive. And gamers want high-quality visuals and audio for an interactive experience. 

This is why you need speakers developed specifically for gaming to get the finest sound. 

There are many speakers on the market, but to choose the best gaming speakers, you must consider the bass. This is regarded as one of the most crucial requirements when purchasing a gaming speaker, along with other qualities. 

An entire list of options may appear enjoyable at first, but as you get too many choices, it gets intimidating. With so many alternatives with varied specifications, it’s easy to become confused about which one is the finest.

This is why we did the homework for you and recommend two of the best gaming speakers.

Razer Nommo Chroma: Custom Woven 3

On the top of our list is the Razer Nommo Chroma: Custom Woven 3. This speaker gives you the greatest audio experience possible throughout your gaming experiences. 

When it comes to specifications, this guy weighs 4.41 pounds and is 5.526.78.67 inches in length and width. 

These speakers are built exclusively for gamers who desire the greatest sound quality possible when playing games. The device has unique woven glass fiber as well as 3-inch drivers that provide a broad sound field with optimal positional precision. It also includes a dedicated rear-facing firing bass port for maximum output, and it also boasts Razer Chroma lights for added flair. The frequency response ranges from 50 to 20,000 Hz, which is perfect for most games. Now you can hear your opponent sneak up on you.  

Logitech Z906 5.1 Surround Speaker System

Another one that is our top favorite is the Logitech Z906 5.1 Surround Speaker System

Logitech makes the best gaming speakers out there. This one weighs 19.6 pounds and has dimensions of 15.2x17x17.3 inches. 

It is essentially a 5.1 digital surround sound system that will allow you to hear every sound thanks to Digital Dolby. The only drawback is that it is only available in black. 

Also, we should point out that these are THX-certified home theatre speakers. So if you want to watch a movie later, they are the perfect speakers for the job!

Visit Our Speaker Reviews Site for More Recommendations

Love our recommendations? We offer more on Speakers Daily from speaker reviews and advice on home audio and theater systems. Check out Bookshelf Speakers Under $500 to stay under your budget without settling on the cinematic experience, or extend your exploration to subwoofers and sound picks.

Reach out for comments or questions.

by
Keep Reading
black subwoofer zoomed in
Subwoofers

How To Determine Subwoofer Placement?

Imagine starting with an empty room to find the best place for your Klipsch R-12SW subwoofer. The dynamic power of this all-digital amplifier is 400 watts, and it is impressive in both music and film, which makes this cabinet in brushed black polymer veneer with a satin-painted plinth the ideal subwoofer in your lounge.

But Where Do You Place It?

For many homeowners and idealists, an empty room may not be the situation because, let us be honest, you always work on the layout of the furniture first and then work on the sound system in the end.  

As a group of speaker experts at Speakers Daily who love their speakers, we understand your dilemma. This is why we will discuss how to determine your subwoofer placement.

Optimum Place For Your Subwoofer

Like many other aspects of life, subwoofer placement frequently entails compromise. It is generally driven by conflicting variables such as décor and aesthetic impact concerns, available floor space, foot traffic regions, and, of course, ideal sound quality.

Step 1: Get The Best Subwoofer

Before you get the placement right, you need to get the subwoofer right too!

When it comes to low-end bass that can be felt and heard, SVS’s SB16 Ultra is our top selection.

It will fill your room with bass that you can feel deep in your bones thanks to its extremely powerful amp and sleek aesthetics. Now to find the ideal location for it.

Step 2: Subwoofer Placement

Subwoofer placement in dedicated listening rooms and home theatres is usually more flexible, with 3-4 alternative sites available because that is the whole objective of the room. If you don’t have a dedicated space, it can get a little tricky.

The most popular subwoofer location is in the front of the room. This results in the best mixing with the main speakers and center channel. It also minimizes the localization issue since the bass is unidirectional.

However, it is important to note that a subwoofer should not reveal its location when correctly positioned. This helps create the impression that the bass is coming from all directions.

Experiencing Localization

If you are placing your Polk Audio PSW10 in the middle of the room results in you experiencing localization, you could try positioning the subwoofer on both sides of the front stage.

Then play a song with a repeating bass line and evaluate the bass quality. Change positions as needed to make sure you get the result you feel is best for your room.  

Learn More Tips And Tricks On Speakers Daily

Check out our blogs for the Bluetooth speakers that you must invest in and stay up to speed on the newest developments to buy the best quality audio products from Amazon. Read our reviews and advice on subwoofers, Bluetooth speakers, and sound picks by following Speakers Daily, an all-in-one resource for audiophiles and music enthusiasts.

Get in touch for questions and concerns regarding our speaker reviews.

by
Keep Reading