You might need to learn how to clean iPhone speakers if the audio quality on your phone isn’t what it once was. When was the last time you checked the speakers on your iPhone? We frequently take the time to clean the displays of our iPhones or even give the clear phone cover a once-over.
Due to regular use, dust, dirt, and debris can accumulate in these tiny ports, causing phone conversations to be muted and audio output to be lowered.
The good news is that you can restore your iPhone to sound like new. You might simply believe that it is aging. Like learning how to clean an iPhone’s charging port, cleaning the speakers is a delicate process, but it can be accomplished with the proper approach and care.
Ensure Your iPhone Speakers Are Working
There is a super-fast technique to check if your iPhone speakers are functioning properly if you’re unsure.
Choose “Sounds” or “Sounds & Haptics” from the Settings app on your iPhone, depending on the version of iOS you’re using, then look for the “Ringer and Alerts” slider and move it around a bit.
This ought should generate a ringtone sound with different loudness levels. You should contact Apple if you don’t hear any sound coming from your speaker or if the speaker button on the “Ringer and Alerts” slider is dull.
5 Easy Steps How To Clean iPhone Speakers
Depending on what you have at home, you can use one of a few techniques to clean the speakers on your iPhone. We’ll walk you through each of them in this section. The most crucial thing to remember is not to clean these components with any liquids.
Step 1 — Using Painter’s Tape
Your iPhone speaker won’t pick up any adhesive from a quality painter’s tape. To remove debris from the speaker on the front of the phone, use tiny pieces of painter’s tape or masking tape with the sticky side down.
Painter’s tape can be used to remove dirt from the speaker holes on the bottom and turned to make a point.
Any dirt and debris that accumulates on the speaker should be captured on the tape.
Examine the masking tape’s surface after each use. Remove and discard the used painter’s tape if it has dust or dirt on it, then roll up a new tape and repeat the process.
Step 2 — Using Soft Brush
Use a soft brush, ideally a small one, to clean dirt and debris from the speaker on your iPhone. For improved control, think about shaving the bristles to a length of half an inch.
A soft-bristled brush can be used to clear dust from the lower speaker holes near the charging port.
To remove dust and filth, gently put the bristles into the holes, rotate them, and then take them out.
Never use liquids such as rubbing alcohol. Even though rubbing alcohol evaporates more quickly than water, liquids shouldn’t be mixed with the interior of iPhones.
The speaker should be cleaned using a soft bristle brush, according to Apple.
Step 3 — Using A Toothpick
Additionally, you have this common object to clean the speakers on your iPhone. However, because they are pointed, you must use them with extreme caution as a mistake could inflict inside damage.
Remove your iPhone case if required, then turn on a flashlight so you can see what you’re doing.
Softly insert the toothpick into the speaker hole using the tip of a wooden or plastic toothpick. If you encounter resistance, stop pushing and stop applying pressure.
Step 4 — Using Air Blower
Others advise cleaning iPhone speakers with compressed air, however, this can easily result in damage. Using an air blower is a safer option. After utilizing any of the aforementioned techniques, use this to blow off extra dirt.
To remove any debris or dust, move the air blower a little bit away from the speaker and blow it briefly many times. Although less potent than compressed air, doing so is the proper thing.
If necessary, bring the blower closer for improved impact. Verify the progress and repeat the procedure if necessary.
Never attempt to use compressed air. The forces that these items produce are too intense to use on more sensitive electronic equipment, yet they are useful for cleaning sturdy electronic gadgets like laptop keyboards. It can force dirt deeper into the device.
Step 5 — Using A Cleaning Gel
You can also quickly clean your speaker with a cleaning gel, which is also available in slime. Although it costs a lot to clean, it is superior to cello tape since it quickly reaches the speaker grill’s interior. Simply cover the speaker with the cleaning slime. Dust and debris are gathered, cleaning the speaker.
Bring your iPhone into Apple Service
Let the experts handle the situation when all other options have failed. Visit the nearest Apple service location with your iPhone. To clean the iPhone speakers, they will use the right equipment. Although it might be a little expensive, using Apple’s qualified specialists to service the iPhone speaker is the safest course of action.
Avoid These Things When Cleaning iPhone Speakers
The speakers or their internal peripherals may be harmed if the iPhone speakers are cleaned improperly. What not to do when attempting to clean the iPhone speakers is listed below.
- Avoid using any sharp objects when attempting to gouge away any dirt. You can scrape your speaker grilles by using the pointed end of toothpicks, tweezers, or even paperclips, according to some advice.
- Don’t use compressed air. These tools are helpful for cleaning durable electronics, such as laptop keyboards, but the force they exert is too great to use on more delicate gadgets. It’s possible that you’ll wind up pushing dirt deeper into the appliance.
- Do not use any liquid, not even rubbing alcohol. While rubbing alcohol does evaporate more quickly than water, any liquid and the internal components of iPhones should not be combined.
- Avoid pressing the cleaning putty too firmly into the speaker grilles while using it on the iPhone speakers. This can force the dirt or debris closer to the speakers.
- While the iPhone is being charged, never clean the speaker. That can endanger both you and the gadget. First, always turn off your iPhone.
How To Remove Water From iPhone Speakers
Has dropping your iPhone into water caused the speaker to sound muffled? Be at ease. The volume and speaker quality of the most recent iPhones could be impacted by fluids and dirt even though they are water-resistant.
Things to remember before you begin:
- Be sure to use a soft, dry cloth to wipe the iPhone.
- Clean the affected area with fresh water if you spilled something other than water.
- Make sure no accessories, including earbuds or the Lightning cable, are plugged in.
- Don’t use your damp iPhone’s charging port. Over the next five hours, don’t charge.
- A damp iPhone’s SIM tray should not be opened.
- Make sure nothing enters the tiny speaker grills or the Lightning connector to dry the water within.
Using Water Eject Shortcut
To remove water from iPhone speakers quickly and easily, use the Water Eject shortcut. You don’t need to download any third-party applications.
- Launch your browser and click the Water Eject Shortcut link.
- Click Obtain Shortcut.
- The Shortcuts application will launch automatically. Click Add Shortcut.
- To execute the shortcut, press it now. Choose Start Water Ejection.
If your iPhone speakers are facing downwards, the shortcut will immediately turn your iPhone volume to maximum and begin playing music to help you throw liquids away. Gravity makes this process much simpler. To make sure there is no water left inside, you can play it several times.
Using Sonic App
- Open the Sonic application after downloading it for free from the App Store.
- Put the iPhone on a surface that is flat or slightly slanted downward. To raise the volume, use the volume up button.
- The water drop symbol should be tapped and held down.
- Swipe anywhere on the screen to adjust the frequency to a number between 160 and 200.
- If the previous procedures are unsuccessful, hit the water droplet icon and let the app play the appropriate sound frequency to push water out until you observe that there are no longer any drops of water coming out of the speaker grill.
Use The Online Tone Generator
- On your iPhone, launch Safari or another browser.
- Visit a website like FixMySpeakers or OnlineToneGenerator
- Pressing the water blower button will start the sound.
How can I clean an iPhone speaker that is muffled?
Take off any cases, films, or screen guards that are affixed to your phone. Check the speaker aperture to see whether it is blocked or dirty. Verify that the iPhone’s receiver is not dirty or obstructed. If necessary, clean the speaker or receiver aperture with a tiny, soft-bristled brush.
Why does the speaker on my iPhone sound scratchy?
If the sound from your iPhone speaker is distorted, check your sound settings and install the most recent iOS updates. Use a delicate cloth, painter’s tape, or a brush with soft bristles to clean the speaker after that.
Could dust harm speakers?
The biggest threat to speaker performance is dust, which is more than just a visual problem. In severe cases, too much dust could harm the speakers themselves. Put speakers in a case while not in use to prevent dust gathering, and clean them as necessary.
These were some practical methods for cleaning the speakers of dust and grime. We also covered the proper ways to clean water from your iPhone speakers so they can once again provide loud, clear sound. You should be able to clean your device’s speaker and earpiece using the aforementioned instructions. Please get in touch if you have any other questions or concerns.