Are you dealing with sound delays on your Bluetooth speakers? Is this lag ruining your immersion in whatever you are watching or listening to? Well, don’t worry because, in this article, we are going to be showing you how to fix sound delays on Bluetooth speakers so that you are able to enjoy perfectly synchronized audio and maintain your immersion.
How To Fix Sound Delay On Bluetooth Speakers
Fixing sound delay doesn’t have to be tough, the first step is to try resetting your Bluetooth Speaker. Typically, most common issues can be rectified just by resetting because it can improve sync. If you’ve already tried resetting and it didn’t work then there are couple of areas where you’d need to look, also you should prevent unauthorized access to your device.
Initial Steps to Fix Sound Delay
When it comes to speakers or headphones in general, they are always going to have an audio latency due to the different stages the audio needs to pass through in order to be played. Usually, this latency is negligible being around 5 to 10 milliseconds. But Bluetooth speakers and headphones have a longer audio latency with a minimum being around 32 milliseconds.
This is because the audio first needs to travel to the speakers in the form of wireless signals, and then these signals are converted from a digital form consisting of zeros and ones to an analog one. After all of this, you are finally able to hear the audio. And so, due to this long latency, if there is a further audio delay for any reason, it appears more prominent and therefore more annoying than that of wired speakers or headphones.
One of the reasons why there can be a delay in the audio produced by your Bluetooth speakers is that the device your speakers are connected to might be far away from them. This is because if a pair of Bluetooth speakers or headphones are far away from a device, or if they are in separate rooms with a solid wall between them, the Bluetooth connection between the two can get really weak. This can result in audio dropping, getting distorted, getting delayed.
And so if your speakers are at a considerable distance from your device or if there is any solid obstacle between the two, then the delay can be removed by bringing your speakers closer to your device. If you are not able to bring the two close enough for a good connection, then you can use a Bluetooth extender to increase the range. Through this, you will be able to have a stable Bluetooth connection over a long distance.
If the delay is still there, then check the battery level of your speakers. This is because when Bluetooth speakers have a low battery, they can produce distorted audio as the wireless signals being transmitted are much weaker. And so, if the battery of your speakers is low, then turn them off and charge them for a little while before using them again.
If you are using your speakers indoors, then another reason for the sound delay can be due to signal interference from other wireless signals around your house that have the same frequency. These signals can come from microwaves, Wifi, or other Bluetooth devices. And so, you can minimize their impact on your listening experience by keeping your speakers far away from these devices or by turning these devices off if they are not in use.
Furthermore, if your device has low RAM, it can cause a sound delay when connected with Bluetooth speakers if it is running a lot of extra programs. Therefore if you are using a low RAM smartphone or laptop as the audio source for your speakers, then it is best to close all the other programs or apps running in the background that are not in use. This will increase the strength of the transmission signals, and so the audio delay will be reduced.
Fixing The Delay Through Your Audio Source’s System
If the steps above do not fix the sound delay of your Bluetooth speakers, then you may need to make some adjustments in the settings of your audio source device. If you are using your computer as the audio source and are operating on Windows 10 then the first thing you can try in order to fix the delay is to disconnect and reconnect your Bluetooth device. All you need to do is turn off the Bluetooth of your computer, wait for a few seconds to make sure that the speakers have fully disconnected, and then turn it back on reconnecting them back to the device.
You can also try troubleshooting the speakers connected to your device. Go to the settings from the Start menu and select, System. After that, select the Sound option and click troubleshoot. Once you have done that, after the system has made the initial diagnosis, it will provide you with a list of options that you can troubleshoot individually. From those options, choose the one for your speakers and click next. And so, your computer will start troubleshooting and fix any problems that might be causing the audio delay.
Another reason why you can be experiencing a delay in your audio is that your device might not be using the latest Bluetooth driver. To update the driver to its latest version, go to the device manager through the start button, and from the list of the devices, click the arrow next to Bluetooth. This will provide you with a list of all the devices your computer is paired with; right-click on the option with the name of your speaker, and then click on ‘update driver’. This will update the drive if it hasn’t been updated and hopefully reduce the audio delay.
You also need to make sure that your audio source device has the Bluetooth 5.0 version. As we have talked about audio latency in Bluetooth speakers, the latest Bluetooth 5.0 version provides the strongest connection and processes data the fastest. Because of this, the transmission occurs quite readily, and so there is less audio latency. And so, if your device has Bluetooth 4.0 or an older version, then the latency is bound to be a lot. And while you cannot update your Bluetooth to a higher version, you can change the source device to one that has Bluetooth 5.0.
In case nothing works the best thing to do would be buying a new budget Bluetooth speaker & you can also learn how certain speaker work.
FAQs
Why does my Bluetooth have a delay?
There can be multiple reasons for the audio of your Bluetooth device to have a delay. One of these is that there might be a large distance between the audio source and the Bluetooth speakers or headphones. Another can be due to the interference from other wireless devices that have the same frequency. There can also be some problems in the system of your audio source, like the Bluetooth driver being in need of an update, and so on.
How do I get rid of Bluetooth audio delay?
You can get rid of Bluetooth audio delay by decreasing the distance between your speakers and your audio source or by placing them farther away from other wireless devices with the same frequencies. Charging your Bluetooth speakers to the full battery might also help reduce the delay. Furthermore, you can reduce the audio delay by troubleshooting the Bluetooth speakers through your source device to get rid of any problems in the system.
What version is my Bluetooth?
Bluetooth 5.0 is the latest and best version when it comes to audio quality over wireless speakers and headphones. Therefore, if you want to check whether your PC has Bluetooth 5.0, you can do so by going to the device manager and click the arrow next to Bluetooth to expand the list of Bluetooth devices. Then, right-click on your brand and select properties, after which, click on the tab labeled as advanced, and then then you would be provided with your Bluetooth version.
Wrapping Up
While Bluetooth speakers are a great way to enjoy music and movies as they are portable and free from the clutter of wires that most speakers are accompanied by, they are not entirely perfect. They are more susceptible to audio delay than their wired counterparts as they have a more intricate audio processing system. And while it is tempting to seek professional help when this happens, if you know how to fix them yourselves, you can save a few bucks. This is why this article shows you all the ways how to fix delay on Bluetooth speakers.
