Love subwoofers and want to know how they work? Well, you have come to the right place because in this article we are going to tell you everything you need to know about how subwoofers work. From its purpose to the mechanics of its individual components and its different types. So that the next time you want to buy a new subwoofer, you can make an informed decision.

How Does a Subwoofer Work

Buying a subwoofer makes sense only if you know how it works and if you really need one, let’s start from the basics.

What is a Subwoofer?

A subwoofer is a type of loudspeaker that, when attached to a speaker, amplifies the audio and produces a deeper bass. Through this, you are able to actually feel the audio, and so your listening experience is taken to the next level. The way a subwoofer differs from a traditional speaker is through this ability to reproduce low-frequency sounds and better quality audio. Also, a subwoofer on its own cannot produce audio; it needs to be connected to a speaker to work.

Subwoofers are quite versatile, and there are different ones available for different purposes. For example, you have subwoofers for cars that are specific to your car speakers and suitable for the acoustics inside your vehicle. You also have subwoofers for home audio, through which you can experience high-quality sound while watching movies, listening to music, etc.

There are also subwoofers for cinemas that produce strong, impactful audio for a large room full of people. And there are subwoofers for an even larger scale purpose like concerts, clubs, and large outdoor events, and serve the purpose of producing low bass without any distortion for a clear and loud sound.

What does a subwoofer do?

Although some people might confuse subwoofers with ordinary speakers, they actually are quite different because of the range of frequencies they are able to produce. Speakers usually produce higher frequencies and are not able to produce much lower ones. While subwoofers, on the other hand, are specially designed for producing quite low frequencies through which you are able to feel the bass.

This frequency depends on the type of subwoofer. If it is for a lower scale everyday use, like for cars, or homes then its frequency can be around 20 to 200 Hz. But in the case of high-end subwoofers that are used for concerts or clubs, they are able to produce frequencies lower than 100 Hz or even 80 Hz.

Subwoofers also produce quite loud audio. This makes them great for places like cinemas and concerts where there is a large group of people due to which loud audio is required in order to reach everyone. Along with being loud, the sound also needs to be clear and free of any sort of distortion for the enjoyment of the people, and subwoofers do fulfill this criterion.

Also, subwoofers provide you with the option of equalization. With the help of this, you are able to adjust the different frequencies of your audio by boosting some frequencies while completely cutting off others. With the help of this feature, you are able to get audio with frequencies perfectly tailored to your liking.

The Components and Construction of a Subwoofer

To understand how a subwoofer works, we need to take a look at the way it is constructed and its different components. This is because the way sound is produced and amplified in a subwoofer depends on these different components and the way they interact with each other. There are various elements in the mechanics of a subwoofer, and each of them is equally important for making it work properly and enabling it to produce high-quality audio.

The first element in the construction of a subwoofer that we need to take into account is the Basket. This basically holds all the other parts of the subwoofer, which is why it needs to be quite strong and sturdy. The basket provides structure to the subwoofer and comes in different types and materials. An ideal basket needs to be strong enough to protect the rest of the components and prevent resonance, as well as light enough to be transported easily.

Apart from holding all the components, the basket also has other purposes like preventing the voice coil of the sub from overheating. This is done with the help of slits at its base that provide an opening for air to pass through the inside of the sub and cool down its internal components. The basket is also where the terminals for your speakers’ leads are situated, through which you are able to connect the sub with your speakers.

The Suspension System

The next component of a subwoofer is the surround. It is a flexible ring around the cone of the sub that connects it with the basket. Although it might not seem like an important part of a sub, it is quite vital to your subwoofer’s suspension system. This is because it keeps the cone perfectly centered, and therefore prevents extra stress from acting on the voice coil. Also, it helps bring the cone back to its initial position safely as it moves back and forth when audio is being played.

Because of all this, along with being flexible, the surroundings also need to be quite strong. It is usually made up of either foam or rubber; both have their own advantages and disadvantages. Foam is more lightweight than rubber and provides a dampening effect to reduce its resonance, but it is less durable. Rubber, on the other hand, is more durable but less flexible than foam. Both types of surrounds also have different effects on the audio of the subwoofer, which is why it all depends on your preference in the end.

A major component of a subwoofer is the cone, also known as the speaker diaphragm. This is also part of the suspension system of a subwoofer, with its purpose being to move back and forth to push the air and produce sound waves. This is why the cone should be lightweight but stiff and unyielding so that less force is needed to push the air without it getting deformed or damaged.

The cone of a subwoofer can be made from various materials, one of the most common of which is a special type of paper. This makes the cone lightweight and able to provide dampening to eliminate its own resonance. And while a cone made from this sort of paper can provide amazing audio, it usually lacks durability. Other materials from which the subwoofer cone can be made out of are metal, kevlar, and a type of plastic called polypropylene.

Another part of the suspension system of a subwoofer is the spider. This is a ring made up of flexible material that connects the cone to the voice coil as well as the frame of the basket. The spider is responsible for the linear movement of the voice coil and the cone, keeping the former properly centered. And the spider controls the magnitude of the movement of the cone and the voice coil; it greatly affects the audio production and quality. Therefore spiders come in various designs and sizes to suit the different purposes of different types of subwoofers.

The spiders need to be quite strong since they have to go through the most stress, which is why they are made up of materials like copper, aluminum, beryllium, weaved into cloth. This is because these materials are conductive and well as flexible, and the cloth provides them with enough structural integrity to keep from deforming.

The Motor System

Moving on from the suspension system, the next components are part of the motor system of a subwoofer that is responsible for moving the suspension system and producing the actual audio. The main component in this category is the voice coil. This is made up of two parts, the coil and the former. The coil is a group of wires, made up of a conductive material, wound tightly around a cylinder. While the former is the name for the cylinder that is supporting the wounds of the coil.

The voice coil takes the properties of an electromagnet when an AC current is passed through it. And so it creates an alternating magnetic field around it, due to which it is able to move up and down. And since the voice coil is connected to the suspension system, it also moves the components in that system along with it.

The next component of the motor system is the magnet. This works together with the voice coil to produce the linear movement of the components. The way this happens is that when the alternating field is produced in the coil, it cuts through the existing magnetic field of the magnet resulting in a force applied on the coil that makes it move up and down.

Lastly, we have the top plate. This is situated on the top of the magnet and attached to the framework of the basket. The purpose of the top plate is to direct the magnetic field of the magnet to that of the coil in order to produce the linear movement in the audio coil. The top plate is usually made up of low carbon steel due to it being a cheaper material as well as its ability to provide a greater flow for the magnetic energy passing through it.

The Way a Subwoofer Works

Now that you are aware of the mechanics of a subwoofer, it will be easier for you to understand the way it works. When you connect a subwoofer to any sort of audio receiver, the latter sends an electric current to the former that carries a low-frequency signal. This current then passes through the subwoofer, and the low-frequency signals are then amplified with the help of the suspension and the motor system of the subwoofer.

Basically, as the current passes through the audio coil, it moves up and down according to the frequency signal. The audio coil then moves the suspension system of the subwoofer at that frequency that further produces sound waves by pushing the air particles to and fro. And so, the audio that was fed into the sub through the audio receiver is reproduced with a larger amplification and a low bass that is suitable to the frequency signal.

And so, through this process, you are able to enjoy the low bass and frequency audio that a normal speaker is not able to provide. This is because, in normal speakers, a lower frequency and bass coupled with high amplification is always accompanied by distortion. While subwoofers, on the other hand, produce minimal distortion at high volumes and provide you with a more immersive listening experience. Lastly, learn what’s the difference between a subwoofer & a speaker.

Types of Subwoofers

There are two different types of subwoofers, passive subwoofers, and active subwoofers. A passive subwoofer needs to be powered by an external power source and can be tuned easily. This can be either an amplifier or a receiver. This is because they require more power in order to produce audio with an extremely low frequency. Along with its ability to produce such low frequencies, a passive subwoofer can also be connected to other subwoofer units. This makes it the best option for larger areas or more intricate setups like for large home theaters or outdoor events.

An active subwoofer, on the other hand, is one that does not require an external power source as they have one built-in. This makes them quite easy to set up as you don’t have to bother with connecting the sub to an amplifier or any other external power source. Also, it has a small build that lets you place it wherever you want. All of this makes it a perfect addition to your medium home theater system.

FAQs

Wrapping Up

When it comes to how a subwoofer works, many people can be intimidated by the technicality of this device. But once you understand the way the components of the machine work and interact with each other, understanding the workings of this machine becomes quite easy.

And so, with the help of this knowledge, the next time your subwoofer seems to be malfunctioning, you can try to figure out the faults in it yourself. Not only that, but knowing the workings of a subwoofer also allows you to figure out which subwoofer is the best for you when you wish to buy a new one.

Wondering about how to install a subwoofer in your car? For enjoying crazy car rides, first, you need a subwoofer that will amplify your sound system. A subwoofer is a speaker that has a low pitched and impressive sound. Once you get an ideal subwoofer system, the next thing is to install it in your car.

Steps To Install A Subwoofer In A Car

You don’t need to spend your money by hiring someone, nor do you need an expert for it. Because the process of installing a subwoofer is a simple and easy task, all that you need is to follow certain steps to install without spending extra money successfully. Here are some of the steps to help you through the whole process of installing subwoofers in your car.

1. Get all the Required Equipment

First of all, you will have to get all the required items and tools. Such as speaker wires, amplifier wires that consist of remote wire and fuse holder, good quality electrical tape, different sizes of cordless speed drill, a metal coat hanger for wire pulling, etc., screwdriver, and other hand tools.

Despite this, you will also need different types of electrical connections, like a 12V battery connection along with a fuse and audio signal source. And lastly, a solid and strong connection for the metal car body. These are the key tools that will be needed constantly throughout the process.

2. Read the Manual

After arranging all the tools and putting everything in place, you have to read the manual thoroughly at least once. As every woofer comes with an installation manual, it is important to go through the instructions even if you know what needs to be done. The purpose is to ensure that you don’t miss anything in the process of installing the subwoofers.

3. Create Space for Subwoofers

Start with creating the space to install the subwoofers. Measure the face of the box, and don’t forget to leave some inches below and above the outer dimension of the speakers. After that, cut all three sides of the box. Utilizing the speaker as a guide creates a way to place the subwoofer.

4. Install the Amp

This is a tricky step to complete the installation of the subwoofers in your car. After creating a space for woofers, now it’s time to install the amp. To handily align every part, you should know where the amp’s bottom sits after fitting the spiked feet. It is easier to locate the bottom with a subwoofer because it has an opening for spikes. For instance, if the hole isn’t accessible, you will need to check the manual.

You should first install the subs of the amplifier modules. After this, you get the amp and all the three inputs, phase switch, parametric equalizer, and the low pass crossover. Also, you have to check for the LED power light placed at the low pass filter. The underside of the module has a rubber gasket, so you don’t have to waste your time tightening it.

Following the procedure, use the star crew for tightening and screwing down the amp after placing the module correctly. Tighten it efficiently to airtight the seal. Along with this, connect the remote wire to the remote lead, i.e., connect it to the 12V accessory wire.

5. Set Up the Subwoofer

Just when the amp is placed safely and correctly. You should set up the subwoofer. Securely place it by using the screws that come in the box. The purpose is to stop unwanted noise while driving. Also, to add protection, attach the grill. Once you are done with the subwoofers, connect it to the amplifier and wire the amplifier in the bridge mode resulting in giving it more power and strength to the sound system.

6. Connect to Signal Source

Depending on the stereo you are using, you will need to connect the wires precisely for a better sound outcome. If you have installed a factory stereo system, it is better to tap off the rear speaker wires using the speaker adapter level. On the other side, if you are using a market stereo, you should connect it to the subwoofer RCA jacks. It will deliver the desired sound after the completion of its installation.

7. Tune the Crossover And Gain

At this stage, the process is almost completed. Set the crossover and gain by playing the stereo at an average volume. Don’t play any music you are not familiar with that might result in turning it wrong. At the medium volume adjust the low pass crossover till you can feel the base.

Lastly, start the amp from zero. Adjust the unit continuously to the point you get a bass that best suits your sound system. These are just simple and safe steps that will help you to install the subwoofer in your car successfully. The maximum time the process takes is 30-40 minutes. After this, you will definitely rock your music without paying out any extra cash.

Do you want to get rid of the wire and its hassle? Connecting your speakers to the TV through Bluetooth is the best choice then. Generally, it is hard to carry your wired gadgets such as headphones and speakers, but now you can enjoy a wireless experience with Bluetooth speakers, and you can also connect them to your TV. Although there are different soundbars that you can pair with your tv, they work perfectly fine, and as a matter of fact, connecting wireless speakers or any other audio device through Bluetooth could be the last option.

How To Use Bluetooth Speakers With TV

It is better to use Wi-Fi or a connection having wires if your device accepts it like Digital Audio Out (Optical) or HDMI (ARC). It is direct to use the system and easy to set-up, and you can stream a better quality of music to enjoy your leisure time even more. Although it does not allow you to connect multi-devices and it doesn’t possess multi-room tricks all by itself, there is a solution to this problem as well. On some devices, you can use an app and set-up your speakers and stereo pairs, while other devices allow you to connect multiple speakers.

Instructions Before Using Bluetooth Speakers

Keep these instructions in your mind when connecting a Bluetooth device:

• You cannot pair more than one Bluetooth audio device at a time.
• You can either connect a Bluetooth audio device or the Wi-Fi Speaker Surround System, also known as Surround or TV SoundConnect.
• You must keep in mind that some compatibility issues are dependent on the Bluetooth device you are using. One example could be some Bluetooth devices such as headphones that are compatible and only designed for mobile devices, and they cannot be paired with a TV.
• There also might be some lip-sync errors that can be problematic.
• Distance between the Bluetooth device and the TV matters and the connection might disconnect.

A Bluetooth device may disconnect due to the following reasons:

1. When any part of your body is in direct contact with the Bluetooth device or TV’s transmitting or receiving systems.
2. When your device is causing electrical variations or simulations due to blockage, that is because of a wall or a corner or office partition, etc.
3. When there is another device in the range of your Bluetooth device, it is exposed to electrical interference with a similar frequency band inclusive of microwave ovens, medical equipment, and wireless LANs.

Pairing A Bluetooth Speaker

1. Turn your speaker into Bluetooth pairing mode, and you have to be sure that your device is reachable and detectable. It would be good and helpful to refer to the product’s user manual and see instructions for how to use your Bluetooth device.
2. Navigate to the list of the Bluetooth audio device on your TV and opt for the option of speaker you want to pair with. Keep in mind that the process of navigation might slightly differ depending on which TV model you own.
3. For Smart TVs from 2019, 2018, and 2017, R, N, and M models, to connect your Bluetooth device, you can press the Home button and select Settings option, then Sound option, Sound Output, and lastly, Bluetooth Speaker List.
4. For Smart TVs of 2016, that is the K model, press the Home button, then choose Settings, then Sound, then Expert Settings, then Wireless Speaker Manager, and lastly, choose Bluetooth Audio Devices to connect your Bluetooth audio device.
5. For Smart TVs of 2015, which are J models of Samsung SoundConnect devices, you have to choose Menu, then Sound option, then Additional Settings, and then lastly, TV SoundConnect option.
6. For 2014 Smart TVs H models of Samsung SoundCloud devices, choose the Sound option from the menu,  select Speaker Settings, and choose the TV SoundConnect option to connect your Bluetooth device.

FAQs

Can a Bluetooth speaker be used with a TV?

Yes, wireless speakers can be connected to a TV with a Bluetooth Transmitter.

Can I use headphones and speakers at the same time?

Yes, and the easiest way is to use an audio splitter to send the sound to two.

How do I know if my TV has Bluetooth?

If you have an Android TV, press the help button on your remote control to access your settings.

Can you use HDMI and Bluetooth at the same time?

No, You can do one or the other but not both At the same time.

Conclusion

Bluetooth is the most widely used wireless device through which you can stream music, and it has set a standard in terms of ease of use, but if you think it’s the only device, you are probably wrong. It is a wireless system that is convenient to use, and it is a point-to-point system through which you can pair a transmitter that might be your phone, TV, or computer, with a receiver that is your speaker to play your music.

Technological advancement has made our lives extremely easy and reliable, and Bluetooth is one of those technological inventions through which you can experience high-quality music. Through all these years, due to Bluetooth invention, the audio quality has greatly improved. I hope we have made the whole process easy for you. Please share your feedback with us and visit us for more content.

Who doesn’t love a good outdoor party? Whether it’s a birthday celebration out on the patio or a little pool party, or even a casual Barbeque night in your backyard, outdoor events are just so much fun, right? But what makes these parties even better is a good music system. However, as easy as it sounds, setting the music system up in the open is not just as simple as placing your regular speakers outside.

How to Weatherproof Speakers

Unlike indoor speakers, outdoor speakers need to be prepared for any kind of weather conditions, whether it is sudden rain or a windy day. Being exposed to the environment means the outdoor speaker requires some extra features to make them fit for the outdoor setting. Therefore we need to weather-proof them before their placement outside. Buying weatherproof units from the market can be expensive. So here are some ways to help you learn how to weatherproof speakers on your own.

Protect The Driver

The drivers are one of the essential components of the speakers. For efficient audio performance, you might want to give special attention to the functioning of the speaker’s driver. Especially in the outdoor setting, the driver must be kept safe from water, snow, and other kinds of moisture to prevent dysfunction of the machine.

Coating the speaker driver with a high gloss polymer is something you can try to keep them dry and safe. However, it is better that you take advice from a professional before choosing your polymer. They can guide you on which polymer brand is better and does not impact the audio quality of the speaker.

For the coating process, start with laying out some newspapers below the speakers. This helps prevent any spillage making a mess around the workspace. Before applying the varnish, shake the container well. Now use a brush to apply the substances to the entire space evenly. Some of the commonly used varnishes you can use are Thompson’s Water Seal or DuraSeal and The Wet Look Pint Clear.

People living in moderate climates can use varnish once. They don’t need to reapply for up to a year or even more. However, if you live in a humid place with frequent rain and snow, you may have to repeat the varnishing process every six months. Only then can you fully ensure the protection of your speaker drivers for a long time.

Protect The Cabinet

Other than the interior of the speakers, the exterior of the cabinet is also vital. To protect the outer enclosure of the speakers, first and foremost, try to place the speakers under a covered area like a tree or a shed. This can help protect from direct exposure to light rain etc.

Apart from the speakers’ placement, for the protection, you must coat the speaker cabinet with polymer varnish. Instead of using the polyurethane polymer that you use for the speaker’s driver, you should use a spar varnish for the cabinet. Although this is more costly, spar varnishes are much more effective—especially when it comes to protecting wooden enclosures from moisture and rot. Similarly, you don’t need to reapply this varnish frequently.

People living in extremely cold regions can also try padding the inside of their speaker cabinets. This helps protect the crossovers and wirings inside the box. Other than that, you can add a grill or any similar protecting structure around the cabinet. This can help provide safety from little objects directly hitting the machine on a windy day.

Protect The Cable

The electric cable needs special protection when placing your speakers outside. This is because, without an interrupted power supply, the speaker will not work at all. So firstly, you can try placing the speakers near to your houses to limit the cable’s exposure to the open environment.

However, sometimes it is necessary to place the speakers at a considerable distance in your backyard. In this case, you should bury the wires underground to increase protection. Some wires in the market are labelled as “direct burial” and may cost you more. Do not fall for this trick, as most of these wires hardly have any difference. You can coat your regular wires with a conduit or a cheap PVC and bury it in the ground without any worry.

Suppose the wires are too long for a complete coat of the protective varnishes, or you are unable to find these varnishes in the market. In this case, you can use another trick. Get some heavy-duty weather-resistant duct tape and wrap it around the wires before burying them underground. This should protect your wires from moisture and other damage for a significant time.

Now the leads of the cable are still pretty exposed above the ground. In this case, you can use a glue gun or other form of hot glue. Apply a considerable amount of this glue around the exposed ends of the wire and let it dry. Once dry, the wire ends can be safe from water or other forms of damage for a good time.

The Downside Of Weatherproofing And How To Deal With It

Using all those polymer varnishes and padding can have an impact on your speaker quality. You will notice the sound is not as powerful outside as you felt it was inside. The sound becomes unclear, the bass response lags, and similarly, the frequency range significantly decreases.

Although you cant altogether cancel out these effects, you can do some things to minimize the extent of the impact. Firstly to increase bass, try keeping the speaker cabinet near a wall. Also, by placing the speakers close (10-20 meters) at an angle of 15-30 degrees facing each other, you can improve the clarity of sound.

Nevertheless, the open environment is sure to reduce your speakers’ volume due to more sound dissipation. Therefore you will need to increase the volume of your speaker’s amplifier considerably when converting it into an outdoor weatherproof unit.

FAQs

How do you protect outdoor speakers from rain?

When your outdoor speakers are not in use, cover them with a plastic bag or other containers to keep them safe and protected.

Can I put indoor speakers outside?

Placing your indoor speakers outside without any weatherproofing can cause damage to these speakers. In such a case, bring them back inside as soon as you are done using them.

Do outdoor speakers need to be covered?

Most speakers are weather-resistant and not weatherproof, so covering them up with a cover or a container is a practical option.

Conclusion

Using these simple tips and tricks, you can weatherproof your indoor speakers in no time and that too at such a low cost. There’s no need to spend all that money on expensive weatherproof speakers in the market anymore. Using these simple techniques, get ready to throw some great backyard parties at your home with your weatherproof audio system giving music quality that is sure to make your next home party the talk of the town.

Is the charger of your Bluetooth speaker broken? Did you forget to charge your Bluetooth speaker before a trip? Well, don’t worry because we are going to show you a few ways through which you can charge your speaker in case of emergency when its own charger is not available.

How To Charge Bluetooth Speaker Without Charger

Nothing ruins your mood during a trip or a picnic, like your Bluetooth speaker running out of battery when you are enjoying some music. And if you cannot charge your speaker due to its charger not being present, this lousy mood can prevail. This is why, in this article, we will tell you how you can charge a Bluetooth speaker without a charger.

1. Laptop

The first way through which you can charge your Bluetooth speaker when its charger is not available is through your laptop. This method is suitable for when your speaker’s charger is broken or misplaced and you need to charge it for a later event. And so, you can easily charge your speaker with your laptop while you catch up on some work or while watching movies or videos.

For this method, all you need is a micro USB cable and your laptop. First, you need to turn off your Bluetooth speaker; otherwise, it might get damaged. Then you need to connect the speaker with your computer using the USB cable. If the cable is plugged into both of the devices successfully, then you would see the led light on the speaker light up, indicating charging.

You can also use this method for times when you are out and have nowhere to plug the charger for your speaker but do have your laptop with you. And if your laptop has a full charge, then you don’t have to worry about looking for any outlets and can easily charge your speaker. Lastly, you could get some excellent laptop speakers too.

2. Power bank

Another way to charge a Bluetooth speaker without a charger is through a power bank. Nowadays, it’s quite common for most of us to have a power bank in our bags for emergencies. And so, if your speaker dies while you are in the middle of enjoying music and its charger isn’t available, then a power bank can come in quite handy.

Also, as power banks can hold quite a lot of charge, you can charge your speaker to the maximum and enjoy hours of music. Although for this method you need to make sure that your power bank has sufficient charge and you have a micro USB cable to connect the two devices.

3. Cell phone charger

If the charger of your speaker is gone for good, then you can use your cellphone charger as a substitute. This is because most smartphone chargers are quite compatible with Bluetooth speakers. The few exceptions being iPhone chargers, and the chargers a couple of new Android models. This is because iPhones have a lightning USB charger, and the more recent Android models use a Type-C USB charger.

Therefore, if your smartphone has a micro USB charger, and so does your Bluetooth speaker, then you can use your phone’s charger for your speaker until you get a new one. And although this is usually quite safe for your speaker, it is advised that you do not use it as a permanent charger. This is because your phone and speaker both have different mechanics, which is why their chargers are made differently to suit their specific needs.

4. Car phone charger

If you own a car and a cell phone, the chances are that you also own a car phone charger. As most of our daily routine requires our cell phones, most of us don’t like to take any chances with their batteries dying while on the road. And as this device is relatively inexpensive yet highly beneficial, most of us have it in our cars.

So, if your speaker runs out of battery while on a road trip with your friends, then you can use this car phone charger to charge your speaker. All you need is a USB cable to connect your speaker with the charger, and you will be able to salvage the atmosphere in your car from falling into a dull silence.

5. Wireless charger

You can also charge your speaker with a wireless charger if your speaker is a relatively new model and supports wireless charging. You can check this on either the manual of the speaker or by looking up the model online. And if the speaker does support it, then you can charge it if you have a wireless charger.

The best thing about this option is that you don’t have to deal with USB cable compatibility. And so you can use the wireless charger of any company to charge up your speaker. A few restaurants and coffee shops also have wireless charging pads, so if you want to charge your speaker on the go, these places prove to be a convenient option.

How to conserve a speaker’s battery

All these methods are just for emergency cases and do not charge your speaker as well as the actual charger. This is why you need to take some precautions to conserve your speaker’s battery when it is on low charge. Through these precautions, you can not only make sure that the low charge lasts longer but also the battery life of your speakers is maintained in the long run.

• Turn the speaker off when it is not in use so that the battery is not being wasted.
• Make sure the speaker is kept at a moderate temperature to prevent the battery from overheating.
• Replace the battery of your speaker if it gets too old or weak. You don’t have to buy a new expensive one; instead, you can use the battery of your old phone to replace it.
• Remove the speaker from charging as soon as the battery is full; otherwise, the battery will get weaker.
• Handle your speakers carefully. If you use your speaker roughly and drop it often, then not only would it damage its internal mechanism, but its battery would also get weaker.

FAQs

Wrapping Up

Bluetooth speakers are an excellent way for you to enjoy music wherever and whenever you want because of their portability. They can be a great addition to picnics, road trips, or a simple get-together of friends lightening the mood and creating a fun environment. But if their chargers break or are misplaced, then these speakers are rendered useless. This is why it is advantageous to know the different ways you can charge these devices without their own chargers so that you don’t have to spend money on a new speaker.

You are going to enjoy owning a Beats pill if you love playing music on a device that is easy to carry around. The lightweight and the low price factor of a Beats pill make it more appealing, especially to a crowd of the young generation. However, owning a Beats pill is all fun and games till the device starts lagging, and you can’t figure out what is wrong with it or how to reset it.

How to Reset Beats Pill

Not every person is tech-savvy, which is why even a minor inconvenience can quickly become a source of headache when you don’t have any sort of technical know-how. If your Beats pill is having problems, then the safest solution for you is to reset the device. You are going to find two methods that will help you to reset your Beats pill in this article, along with some other issues that you may face in the future and the reasons behind them.

Methods for Resetting

Knowing how to reset your Beats pill is necessary for many reasons. If you are having any connectivity issues or just want to get rid of all the saved settings such as paired devices, resetting the device once will help you deal with all these issues. There are two ways to reset a Beats pill, and both methods have been listed below.

First Method

The first method to reset your beats pill can be used if you want to reset the device without deleting all the settings. What you will need to do is press the power button for precisely 8 seconds and then release it. After releasing the power button, press it one more time. When the LED light will flash from white to red three times, know that your Beats pill has been reset without getting rid of the paired devices.

Second Method

This method is used when you do not want to merely reset the Beats pill but are looking for a way to delete all the previously saved settings from the device. In order to reset your device back to the factory setting, you will need to plug your device into a power source with the help of a cable. Once connected, turn the Beats pill on. Press the ‘b’ button and the power button together for 6 seconds and then release them. The LED light present on the device will flash red six times, which signifies that your device has been reset to factory settings.

Major Charging Problems With A Beats Pill

If you own a Beats pill, you are aware of all the issues that start arising in the device if it is not taken care of properly. To make sure your Beats pill does not die after a few uses, you need to keep an eye out for some issues. If your device is showing any of the problems listed below while charging, then get it checked before it gets fried and you lose all your money.

Power Issue

Connect your Beats pill to the charging outlet on the wall with the help of a cable. Make sure you are using the cable that came in the box with the device and not an old one. If the power indicator lights up and the device starts getting charged, then well and good. However, if the power indicator does not light up, then either you are dealing with a faulty cable or the device’s motherboard has been damaged. To be sure which issue you are dealing with, try using a different cable. If the power indicator does not light up with a different cable, it is time to change the motherboard.

Defective Battery

The second reason behind your Beats pill not getting charged properly is a defective battery. When your charging cable has been connected to the device, and it does not start charging, then first try a different cable. If it remains dead with a different cable rather than getting charged, your device’s battery may be dead. In this case, you will need to get a new battery for your Beats pill.

Reasons Behind the Pill Not Getting Connected

Owning a Beat spill is fun as you get to play music at a mini speaker by connecting the device to your phone. It can even be used to answer calls on your phone. However, when the device starts to give you a hard time, all the fun goes down the drain. There can be many reasons behind a Beats pill not working properly. Some may be technical, and you will need to consult a tech specialist for them. However, there are many other minor reasons that can hinder the pill’s performance, and you may be doing them unintentionally.

Long Distance

This is the first mistake that we all are guilty of and have made at some point in our lives. When you purchase a device that gets connected to your phone via Bluetooth, you need to keep both in close proximity for the device to function properly. When you have connected your Beats pill to your phone through Bluetooth, make sure there is not a long-distance between both. Both devices should be within 30 feet range for the speaker to work efficiently without getting stuck.

Physical Barriers

Physical barriers often hinder a Bluetooth device’s functionality. Metal objects are known to interfere with Bluetooth and Wi-fi signals. From something as big as a metal door to something as small as metal nails in the wall can interfere with Bluetooth signals, especially if the signal is weak already. If your Beats pill is getting disconnected from your phone, check if a metal object is nearby.

Conclusion

Having a small speaker that you can play music at a loud volume while you carry it around in your hand sounds fun, and it sure is! Especially if you are going on camping trips or hikes, you can take the Beats pill with you and enjoy the trip even more than usual. However, when the speaker starts lagging and you have no clue what to do, the safest option is to reset it. The methods for resetting have been discussed in detail in the article above. I hope you found a solution to your problem in this article.

Insignia Bluetooth speaker is portable and allows you to experience optimal and powerful audio without any interruption. This pleasant speaker may face glitches, bugs, or pairing issues. You might face the same issues, but do not worry because, in this review, you will be shown effortless steps about how to pair up and reset your Insignia Bluetooth speaker. Nowadays, Bluetooth speakers are preferred over cable speakers as they are handy and offer good connectivity.

How to Pair and Reset Insignia Bluetooth Speaker

The speaker integrates a Bluetooth feature that allows you to play your favorite music by pairing it with other audio Bluetooth devices. Bluetooth speakers can accompany you to beaches and parties. The Insignia speaker sounds as good as any indoor speaker. Insignia Bluetooth speakers are both durable and affordable. It also features good battery life and water resistance.

Pairing the Insignia Bluetooth Speaker with an Audio Bluetooth Device

Pairing up your Insignia Bluetooth speaker with an audio device is a straightforward task. Follow these steps to achieve a good result. The first step is to turn on your speakers by pressing the power button and hold the power button for about a second or two. You will know immediately that the speaker has turned on when the blue LED light starts to blink.

At this stage, your Insignia Bluetooth speaker is ready for pairing. Once your speaker is in the pairing mode, the next step is to ensure the distance of your Bluetooth device from the speaker. The suggested distance should be within 33 ft that is 10 meters. Whatever audio device you are using, be it a cell phone, now it is time to turn on the Bluetooth of the audio device, which automatically enters pairing mode.

Next, consult the manual of your audio device that likely comes with the device to seek further information such as Bluetooth compatibility, etc. Moving forward onto the next step, which is the connectivity of the device.  Your Bluetooth of the audio device will show the option of Insignia speaker with the name of NS-SPBTBRICK. Select this option.

If a password is required from you for the access, then enter the code with 0000. Thus, you have paired your Bluetooth device with the Insignia speaker. When your speakers are paired, the LED lights solid blue on the completion of pairing acts as an indication as well.

If you want to disconnect your device from the speaker, press and hold the Bluetooth option or button visible on the insignia speaker. Hold the button for about three seconds, after which you will listen to a beep sound. After disconnection, your Bluetooth device and speaker again go into pairing mode with blue blinking LED light.

How to Reset Insignia Bluetooth Speaker

If you want to sell your Insignia Bluetooth speaker as an open-box item or fix minor bugs, you need to reset it. Resetting your Bluetooth speaker will make it go back to its default as it will remove all the Bluetooth devices that are paired. Follow these simple steps to reset the Insignia Bluetooth speakers.

First, if your Insignia speaker has a built-in voice assistant feature, remove your insignia speaker from the app’s device list, such as the Google Home app. Next, you can factory reset or default by pressing and holding the button of the microphone. Hold the button for about 12 to 15 seconds, after which you will achieve resetting of the speaker.

Once you have reset the speaker, it will reboot. You can also reset the speaker by pressing and holding the previous button and the volume up button simultaneously. Next, hold down the buttons for about 5 to 12 seconds, after which you will hear a warning. The LED light will start to blinks power off the Insignia speaker. Once you turn it back on, your Insignia Bluetooth speaker would have been reset.

Many people make mistakes when resetting the Insignia Bluetooth speaker by pressing and holding the power button rather than the microphone or previous and volume up+ buttons. As a consequence, the speaker is not reset at all. Therefore, ensure that you follow the steps mentioned above keenly to avoid such errors.

Troubleshooting

If you are having issues connecting with a Bluetooth device, you can do the following things to avoid them in such cases. The first is to minimize the distance between your Bluetooth device and the Insignia speaker. Then, turn your speaker off and turn it back on and reconnect them. If you are asked for a code to grant access, then enter password 0000.

Also, make sure you check the battery life of your speaker and Bluetooth device. If either of them has low battery life, you will have a problem pairing up the devices. So, recharge the battery of the speaker. Finally, ensure that your speaker is not connected to some other device and both the speaker and Bluetooth device have entered into pairing mode.

You need to pay attention to another issue that is compatibility. You are unable to establish a pairing due to a lack of compatibility with the Bluetooth device. If your Bluetooth device supports Bluetooth 4.0 or below, then you are good to go. If your speaker is connected to an AUX cable, then disconnect it and re-enter into pairing mode.

If the option of Insignia speaker with NS-SPBTBRICK does not appear on the screen, then while your speaker is in pairing mode, refresh the list of devices that appear on the Bluetooth list. Shorten the distance between the speaker and the Bluetooth device. These steps will allow you to pair up your speaker with a Bluetooth device.

To Conclude

This was an in-depth review of how you can pair and reset your Insignia Bluetooth speaker to offer you uninterpreted, non-stop music and audio. The resetting of the speaker will store its setting to default. It is pretty helpful If you are interested in selling your Insignia Bluetooth speaker. However, if you are having minor bug issues, resetting will solve the problem, but it will remove all the data that the speaker has saved. If resetting does not help you solve the problem, then you need to seek professional help.

However, when your speaker blows out, and the music dies down right in the middle of the party, that sure sucks the fun out of the whole ceremony. Blown speakers are not only a cause of frustration due to the lack of entertainment, but they also cause stress, especially if you have recently spent a large sum of money on that particular set of speakers.

How To Fix A Blown Speaker

As easy as it is to discard a blown speaker, it also takes quite a toll on the pocket as you need to spend more money on a new one. However, throwing the damaged one out is not the only option for you. There are a few ways through which you can fix your damaged speakers. In this article, we have listed all the tips through which you can identify and fix a blown speaker.

How To Tell If The Speaker Is Blown

There are stages of a speaker blowing out. In some cases, no sound comes from your speaker even after a hundred tries. While in many other cases, the speaker set makes an audible noise instead of playing music, or sometimes there is noise playing along with the music.

However, just because your speaker is creating a small noise or playing any music does not always mean that it has blown. In many situations, it is just a connection problem or any other minor issue. There are a couple of ways you can find out whether your speaker has actually blown or it is just giving you a tough time.

Static Noise

The first way to identify a blown speaker is to find out if it creates distorted static noises instead of playing music clearly. Try to connect your speaker to your phone or any other device that plays music and check if there is any distortion between the music. Please avoid using the radio for this step, as radios tend to make static noise of their own, which will not be helpful. If there is distortion even at low volume, then there is a high chance that your speaker has blown.

Popping Sound

This is a second way to determine whether your speaker is actually blown or it’s just your bad luck. If your speaker makes a popping sound instead of playing your soothing music, then know that the time to get a new set of speakers has come as the one you have is blown.

Check The Parts On The Inside

Another way to check whether your speakers have given up on you is by inspecting the interior of a speaker. Firstly, remove the grill, and check the cone. If you are looking at a ripped cone or a crumbling foam that surrounds the cone, then it is time for you to invest in a new model.

Connect Another Set

If using the previous methods did not help you identify the problem, this is the last method that will surely tell you. Connect your phone to another set of speakers, and if the replacement works just fine and your own set doesn’t, that is a clear-cut sign that you need to buy new speakers as your old ones are dead.

Fixing the Speaker

Now that you are sure that your speakers have blown, it is time for you to replace them and get yourself a new model. However, if you do not want to spend a large sum on a new set of speakers, then there are a few ways with which you can bring your old model back to life. You just need to check parts of the speakers and either repair them or replace them.

Fix The Cone

Whether it is your car speakers or the speakers attached to your computer, first find out which side creates the problem. Check both left and right speakers, and once you have identified the problematic one, then proceed with that one. If the cone or the foam surrounding the cone has ripped, then there are ways for you to fix it without spending a handsome sum of money.

Remove the grill of the speaker and observe the cone. If it is ripped or has a small hole, then there is still hope for your device. Take out strong tape or glue to mend the torn area. Avoid using needles and thread to fix the torn part; that will just worsen your problem.

Check The Voice Coils

If the cone and the foam part of your speaker are not punctured and ripped, then the second thing that may have blown your speakers is the voice coils. Check the voice coils and see if they are damaged or melted. If the coils have any gap in them or are melted, there is no hope of reviving them. You will need to get your hands on replacement voice coils.

You can find replacements from the manufacturers of the speakers or any other electronic store. Remove the cone and gently detach the glue that is holding the cone and the voice coils together. Once you have removed the damaged coils, install the replacement coils gently, and with the help of some glue, your speaker will be brought back to life.

However, in many cases, the voice coils are not damaged or melted; they just get separated from the cone, birthing a blown speaker. This happens due to the vibrations of the speaker or because the glue from the cone deteriorated. Get your hands on a slow-drying glue and carefully apply a layer of it right between the coil and cone, and hold the two together.

Loose Wiring

If you are still not getting any sound out of your speaker, even after fixing the cone and the coils, then another guess is that the wiring of the speakers has been damaged or is loose. Wiggle the wiring in a few directions to see if your speaker starts working, and hold it in the direction where it does work. You can use some tape to hold the wiring stably in that certain direction, but this method is very temporary. A long-term solution would be to change the wiring of the amplifiers.

Clean The Speakers

Before you put all the parts back in their place, make sure to clean them. Dust can also be a cause of death for speakers. Use alcohol on a q-tip to clean the small parts of the speakers. For the rest of it, you can use plain cloth. Just make sure you do not rub any part harshly.

What Causes A Speaker To Blow

There are many reasons that cause a speaker to blow and hence, forcing it to succumb to its death. Some issues happen because of mechanical failure, while others happen due to thermal problems and even because of high signal or volume.

High Equalization & Volume

Altering the equalization settings of your speakers may not seem like a big deal at the moment. However, it is one of the major reasons behind a blown speaker when you boost your speakers’ bass and then turn the music up at a really high volume, which causes rupturing of the cone of your speakers.

The same goes for the other settings available on the equalizer, such as treble and midrange. Turning their frequencies high for a longer period of time will end up in your speaker blowing out. Apart from the equalizer settings, playing music at the highest volume for longer duration damages the cone of your speakers.

Excess Power

Another reason behind a blown speaker is giving it more power than it can handle. Overpowering the speaker can create a buildup of heat that causes two problems, both resulting in a blown speaker. The first problem is that it may end up burning or melting the voice coils. Melted voice coils often stick to the magnet, and hence your speakers stop working. Forget about distorted sound; if the voice coils of your speakers melt, you will get no sound at all!

Another problem that heat build-up may cause is that it may melt the glue holding the small parts inside the woofers, such as voice coils and cones. Due to heat buildup, the glue holding the cone to the voice coils or the voice coils to the spiders may disintegrate, which will only result in distorted noise emitting from your speaker instead of pleasant music.

Absence Of Protective Layer

Every speaker has a protective layer at the front in either a grill or a soft mesh fabric. What this layer does is that it stops dirt and small particles from entering the speaker. The presence of dirt and small particles will hinder the movement of the voice coils, which will cause irregular movements of the coils, causing distortion.

Another perk of this protective layer is that it also keeps the insects such as spiders outside the speaker and prevents them from nesting and turning the inside of the speaker into their houses. The presence of insects can cause tearing and damage to the cone and the foam of the speaker.

Mechanical Failure

Mechanical failure is also a prevalent reason behind a blown speaker. The reason behind this is if you purchase a speaker that has low quality or defective components added to the design. If even a single part of the speaker is not of high-grade quality, it will damage the entire system.

Another factor that comes under mechanical failure is loose wires. If your speaker has loose wires, do not keep high hopes and get them fixed as soon as possible. Loose wires cause rattling and popping sound resulting in burn-out of the speaker.

How To Avoid Blowing Your Speaker

Now that you know what the reasons for your speaker to produce distorted noise and blows out are, there are also some methods to keep your speakers safe. Allow me to share some ways you can prevent all the reasons behind a blown-out speaker from happening to your speaker set.

Durable Construction

This goes without saying that always buy a speaker that comes with a durable outer body and strong inner parts. If you spend all your money on a speaker with low-quality voice coils or cones, then do not keep higher expectations from that speaker set.

Matching Speaker To The Amplifier

One other way through which you can avoid burning your speaker up is to match the speaker to the suitable amplifier. If the speaker and the amplifiers are mismatched, then the speaker will receive a high amount of signal, causing it to blow out.

Protective Layer

The presence of mesh fabric and a strong grill on top of the cones is highly crucial. It keeps the inner parts of the speaker safe, resulting in a longer life of the speaker set. If dust enters your speaker set, it will disrupt the movement of the voice coils. Similarly, if a foreign object or an insect enters your speaker set, they may damage the speaker’s cone, causing it to blow out.

Conclusion

Being stuck with a blown speaker can be quite a nuisance, whether you are on a road trip or at a concert. The purpose of this article was to enlighten you about the multiple ways you can fix your blown-out speaker set yourself without spending a large sum on a new model. Every aspect has been discussed in detail, so even if you are not handy with tools, you will easily bring your dead speaker back to life. I hope this article was helpful and you found a solution to your problem.

If you’re searching for the best mid-range Bluetooth speaker, then you’re at the right spot! The JBL Charge 3 is among the best Bluetooth speakers under $100 that has scored thousands of positive feedback from customers. Before getting into the specifications, we like to mention that JBL is a popular company for making remarkable sound gadgets in history. People usually are concerned about the manufacturer’s reputation and their customers’ ratings, so in this way, JBL is one of the leading corporations in today’s market.

In particular, the JBL Charge 3 is famous for its premium build quality, exceptional surround sound, and perfect volume. It comes with extraordinary specifications, which are rare to see in this price range. As a whole, it is the best Bluetooth speaker, and in this article, we will tell you why and what makes it step ahead of its market competitors.

JBL Charge 3

Product Specifications

The given chart depicts the specifications of JBL Charge 3, including the body dimensions and internal properties. Next, we will discuss details regarding its construction, sound system, connectivity, and more. So let’s not wait more and start with the design elements.

Build Quality

The JBL Charge 3 comes with a more rugged building which makes it better than previous generations. It has a fabric weave that is used in many good quality speakers or ear products on the outside. This material helps with durability and sturdiness. It also provides grip to the product, so if you want to hold it in your hand, there would be less chance of falling because of the fabric weave. Overall, it makes the appearance of JBL Charge 3 more decent and handy. Apparently, as we wrote above, the speaker is nine inches tall, so it is a little larger than its market competitors. But, it is not heavier. From the outside, the look is totally worth the price.

Layout

Then, the other matter of discussion is the layout. In our opinion, JBL Charge 3 offers a standard button layout that enables you to regulate the volume, connectivity, and power. It allows quick pairing with multiple JBL audio devices or speakers so you can get an amazing surround sound experience. You have also got a play and pause button, and if you double press that, it will skip the track. So conclusively, the setup is quite easy to understand and use. If you’ve never used a Bluetooth speaker before then, you’ll probably like the basic settings of this masterpiece.

Over and above that, the JBL Charge 3 is a forward-facing Bluetooth speaker. It means that if you end up offside of other devices, then you may not listen to sound clearly because the speaker side has been covered. However, that’s not the case with JBL Charge 3 because, as you see, it has a 360 degree sound system. This arrangement is usually found in the other expensive models, but luckily JBL is fulfilling our lower price demands.

Battery

The best thing about JBL Charge 3 is that it really values great battery life. It gets 20 hours of playback time on just a single charge which is insane. With normal use, one can use it for more than a week without charge. To charge this device, you need a micro USB cable. The fun fact is that the speaker has a built-in charger that you can use to charge your gadgets like cell phones or other accessories. This feature makes it a handy product and is really important for travelers.

Connectivity

Furthermore, the JBL Charge 3 has both connectivity options. You can play music either with Bluetooth (wireless) connectivity or via an auxiliary cable (wired connection). The Bluetooth connection range varies around thirty to forty feet which is better than the standard Bluetooth range given in ordinary speakers. In general, you will not get any disruptions related to Bluetooth working or signals, etc. However, the common boundaries are there as you can lose the connection or disruptions from going upstairs or downstairs because of doors, walls, or other solid surfaces. Besides that, Bluetooth is far better and more stable than other speakers. Moreover, you can also connect up to three Bluetooth devices to charge them, making it a convenient and portable option.

Sound Quality and Microphone

It also has a microphone through which it supports the speakerphone. But according to our thoughts, it doesn’t cover a major consideration. The reason is that people would not use it much. What matters the most is the sound quality and loudness! The JBL Charge 3 has an amazing sound quality, and it provides louder sound than prior generations. The sound quality is also best and has deep bass, far better than comparable speakers. It sounds very crusty highs and lows, even at maximum volume. This is the best Bluetooth speaker for parties or home theaters. The JBL gives you a distortion-free, crystal clear, accurate, and smooth sound experience, which is difficult or nearly impossible to find in this price range.

Waterproof Feature

Mostly, the customers ask whether charge 3 is ipx certified or not? This question arises to encounter the water-resistant ability of a device. For your information, the JBL Charge 3 is a water-resistant speaker. It can resist water in an area that is one meter down for half an hour. Unlike most of the devices, it floats over the water, and that’s another great move. Now you can listen to your favorite songs via Bluetooth without any fear and disaster.

FAQs

How do I know when JBL Charge 3 is fully charged?

Typically, a Bluetooth speaker is equipped with RGB lighting to show the connectivity, charging, or power status. If the device is fully charged, the dots will stay lit without a blink. There are no other blinking dots shown on your device. When you leave the unit, dots will disappear once fully charged.

Is JBL better than Bose?

Both companies are actually manufacturing high-end products. But after testing and research, we came to know that JBL is better than Bose in terms of battery life, durability, and superior sound. Also, Bose is more expensive than JBL and provides low volume. So it is a good idea to consider JBL if you consider price, durability, and superior sound as main features.

Is the JBL charge 3 worth it?

The Charge 3 is a better unit for those who want the best mid-range Bluetooth speaker. It comes with great versatility, durability, and performance. We would really like to appreciate this device’s power bank feature, which makes it very handy and portable. In the end, this portable Bluetooth speaker is rich in specifications. Ranging from build quality to sound quality, it covers every aspect well.

Can you adjust the bass on JBL charge 3?

In most Bluetooth speakers, you can influence bass by holding the volume plus and BT buttons. But that’s not the case with JBL speakers. To adjust the bass on JBL Charge 3, hold Bluetooth and volume buttons. The volume plus button with Bluetooth can restore the bass, while the volume down and Bluetooth button can reduce the bass. You have to hold the buttons for at least 10 seconds to perform the function.

Does the JBL charge 3 have an equalizer?

The JBL Charge 3 comes with Spotify playback equalizer settings. This is an updated feature that lacks in previous JBL steps. It brings you a perfect combination.

Conclusion

The JBL Bluetooth speakers will give you a complete sound package with impressive quality, durable building, and much more. Surprisingly, it is an affordable device that shakes hands with directional best quality sound. Getting such specifications, water-resistive properties, rigidity, surround sound system, etc., in one package, which is also affordable, is a big deal actually. You should consider it if you are planning to spend money on the best portable Bluetooth speaker. We hope that you’ll find it great!

Happy Listening!